Product Data:
| Model | JG-FW05 |
| Name | Calcined Alumina Flap Wheels with Shaft |
| Abrasive Material | Premium Calcined Alumina Oxide |
| Diameter | 15-100mm |
| Grit | #40-320 |
| Code | Diameter/mm | Width/mm | Shaft/mm | Grit | Max. RPM | |
|---|---|---|---|---|---|---|
| MW15153 | 15 | 15 | 3 | #60,80,120,240 | 26000 | |
| MW20106 | 20 | 10 | 6 | #60,80,120 | 26000 | |
| MW20156 | 20 | 15 | 6 | #40,60,80,120,240,320 | 26000 | |
| MW20206 | 20 | 20 | 6 | #60,80,120 | 26000 | |
| MW25156 | 25 | 15 | 6 | #40,60,80,120,240 | 25500 | |
| MW25206 | 25 | 20 | 6 | #40,60,80,120,240 | 25500 | |
| MW25256 | 25 | 25 | 6 | #40,60,80,120,240 | 25500 | |
| MW3053 | 30 | 5 | 3 | #60,80,120,240 | 25000 | |
| MW30106 | 30 | 10 | 6 | #40,60,80,120,240 | 25000 | |
| MW30156 | 30 | 15 | 6 | #40,60,80,120,240 | 25000 | |
| MW30206 | 30 | 20 | 6 | #40,60,80,120,240,320 | 25000 | |
| MW40156 | 40 | 15 | 6 | #40,60,80,120 | 19000 | |
| MW40206 | 40 | 20 | 6 | #40,60,80,120,240,320 | 19000 | |
| MW40306 | 40 | 30 | 6 | #40,60,80,120,240 | 19000 | |
| MW50106 | 50 | 10 | 6 | #40,60,80 | 15000 | |
| MW50206 | 50 | 20 | 6 | #40,60,80,120 | 15000 | |
| MW50306 | 50 | 30 | 6 | #40,60,80,120,240,320 | 15000 | |
| MW50406 | 50 | 40 | 6 | #40,60,80 | 15000 | |
| MW60156 | 60 | 15 | 6 | #40,60,80 | 12700 | |
| MW60206 | 60 | 20 | 6 | #40,60,80,120,320 | 12700 | |
| MW60306 | 60 | 30 | 6 | #40,60,80,120,240,320 | 12700 | |
| MW60406 | 60 | 40 | 6 | #40,60,80,120 | 12700 | |
| MW60506 | 60 | 50 | 6 | #40,60,80 | 12700 | |
| MW80156 | 80 | 15 | 6 | #40,60,80 | 8500 | |
| MW80206 | 80 | 20 | 6 | #40,60,80 | 8500 | |
| MW80306 | 80 | 30 | 6 | #40,60,80,120,240 | 8500 | |
| MW80406 | 80 | 40 | 6 | #40,60,80,120 | 8500 | |
| MW80506 | 80 | 50 | 6 | #40,60,80,120,240,320 | 8500 | |
| MW100156 | 100 | 15 | 6 | #40,60,80 | 6500 | |
| MW100206 | 100 | 20 | 6 | #40,60,80 | 6500 | |
| MW100306 | 100 | 30 | 6 | #40,60,80,120,240 | 6500 | |
| MW100406 | 100 | 40 | 6 | #40,60,80,120 | 6500 | |
| MW100506 | 100 | 50 | 6 | #40,60,80,120,240,320 | 6500 | |
| Other size available. |
Calcined Alumina Flap Wheels with Shaft are designed with shaft as an integral part of each wheel. These shafts run through the wheel creating better balance, a reduction of chatter, and reduced operator fatigue.
Their flexibility allows the wheels to access hard-to-reach areas.
Variety of sizes are provided.
- Excellent flexibility
- Long life
- Fast cutting
- Easy and convenient to install
Calcined Alumina Flap Wheels with Shaft are used for Finishing, light deburring, cleaning or preparation for subsequent treatments on small or hard-to-reach surfaces.
Widely used in stainless steel, standard steel, alloyed steel, aluminium, titanium, non-ferrous materials and alloys, plastic materials, glass fibre, rubber, marble, stone, concrete, and wood.
